DIVINIUM PERMANENT SPOOFER GUIDE
  • Getting Started
  • SETUP
    • Bios Flash
    • Windows Reinstall
      • Normal Reinstall
      • RAID Reinstall
      • Clean Traces
    • Bios Settings
    • Disable Windows Defender
  • SPOOF
    • Spoof
      • EFI
      • Misc Tab
    • Windows Settings
    • After Spoof
  • Finished
  • FIXES
    • Troubleshoot
Powered by GitBook
On this page
  • Disable ALL unused Network adapters
  • Change adapter properties
  • Activate Windows
  • Only Apex Legends:
  1. SPOOF

Windows Settings

PreviousMisc TabNextAfter Spoof

Last updated 2 months ago

Disable ALL unused Network adapters

  1. Press Win + R, type ncpa.cpl and click OK

  1. Remember the name of your active connection/adapter you're using (This will obviously be a different adapter for you)

  2. Press Wind + R, type devmgmt.msc and click OK

  3. Click view and enable 'Show hidden devices

  1. Go to your network adapters

  2. Right-click and select Disable device on ALL other Network adapters that you are not using

Change adapter properties

  1. Press Win + R, type ncpa.cpl and click OK

  2. Right-click your active connection and click on Properties

  3. Configure it as shown below and make sure ONLY leave those two options enabled, disable all others:

  4. Click Configure

  5. Switch to Advanced and configure the following properties: 

    Advanced EEE - Disabled
ARP Offload - Disabled
Flow Control - Disabled
IPv4 Checksum Offload - Disabled
Large Send offload v2 (IPv6) - Disabled
Network Address - Not Present
TCP Checksum Offload (IPv6 ) - Disabled
UDP Checksum Offload (IPv6 ) - Disabled
NS offload for WoWLAN - Disabled

If you can't find some/all options it doesn't matter, just skip it.

Hide Mouse and Keyboard serials

  • Open regedit as admin and paste this address in the search bar "Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum"

  • Now open up the Enum folder, right click the "USB" folder and click "Permissions" now Deny all permission for all groups like this

  • Repeat this step for the folder HID and DISPLAY too

Activate Windows

  1. Open powershell as admin and paste this in "irm https://get.activated.win | iex" (without the "")

  2. A CMD window will open and select the option 1 (Press 1)

  3. If it says windows is already activated then activate it anyway

  4. After its finished click any key and close it, you're done with activating windows

Only Apex Legends:

Spoof Monitor serials

    • Make sure to just modify your own serials that are there for you slightly. Example: Your original Serial Number: 198SJA9321SL

      Your new Serial Number: 198SJA9719AC

Tutorial on how to use CRU

Video link