Normal Reinstall

Normal reinstallation instructions.

I DON'T HAVE A USB - WHAT DO I DO NOW? | IT LOOKS TOO HARD FOR ME!

Believe in the process. It may seem challenging at first with all the images and information, but trust us, it's much simpler than it looks! We encourage you to give it a try. If you need assistance, don't hesitate to contact us in the Discord. 💚

Don't have a USB to reinstall with? Most cost only $5, and it's recommended to get one.

Otherwise; Reinstall Windows by settings > remove everything > Cloud download > Change settings > Clean data [YES] / Delete files from all drives [YES] / Download Windows [YES] > Confirm & next and wait. This could take a little.

REINSTALL WINDOWS WITH A USB (HIGHLY RECOMMENDED)

Follow this video on how to setup Rufus

• Make sure your USB Stick is connected!

Rufus - Create bootable USB drives the easy wayRufus

Download Windows 10

After Rufus is finished and says READY click close

YOUR USB CONTENT SHOULD LOOK LIKE THIS NOW:

NOTE: When reinstalling Windows, most modern systems will automatically detect and install basic Ethernet drivers, so your connection will work fine after the installation. ✅

In some cases, you may need to manually download and install network drivers.

Make sure to download your network drivers (LAN) and/or WiFi drivers from your corresponding motherboard model. So for example "Asus B550 Network drivers" on Google, and put them in the USB drive. You can skip this step since this is just a precaution, but there is a small risk of no connection after Windows reinstall. 🌐

Restart the computer, and hold shift at the same time.

Select Use a device and select your Flash Drive (If you don't find this boot into USB through Bios)

Select Windows 10 Pro (IMPORTANT!)

Select "I don't have a product key" (Don't worry, we will activate this later for free)

Select Custom: Install Windows only (advanced)

1. Press SHIFT + F10 (A CMD will pop up)

2. Now write diskpartinto the CMD 💬

3. Then write list disk into the CMD to see all ur drives 💬

4. Write select disk 'X' (X = Disk number) then write clean for ALL disks, besides ur USB.

Your Flash Drive is likely the last drive listed and the one with the least amoung of storage (DO NOT DELETE IT)

Close the CMD and click Refresh

Select your main drive and click Next

The installation process should start

Make sure to follow these steps while and after reinstalling:

1. Make an offline account or a new Microsoft account. Don't log in to the old ones.

2. Do not log in to OneDrive, Gefore Experience, & Medal using the same account.